VDWALL A6000 Video Processor Specifications & User Manual

VDWALL A6000 can assemble maximum 4 video input cards, the series numbers are In-A、In-B、In-C、In-D. In-A and In-B are 2K input cards,In-C and In-D are 4K input cards . Each 2K input card supports 4 channels of signal input, signal input port description as the following table:

CVBS1 channel of PAL/ NTSC format composite video input
HDMI(DVI/VGA)1 channel of HDMI1.3 digital signal input ( compatible with DVI,can choose VGA input via switch beside the port )
SDI1 channel of SDI digital serial signal input
HDMI2 channel of HDMI2.0 digital signal input
DP1 channel of DP1.2 digital signal input

Each 4K video input card supports 3 channels of signal input, signal input port description as the following table:

DVI-1 ~ DVI-44 channels of DVI output ports, used to connect LED sending card or monitor .

VDWALL A6000 LED video processor can assemble maximum 2 output cards, series number are Out-A and Out-B. Each output card can output 4 channels of DVI signal, output port description as the following table:

LANLocal area network TCP/IP network control port
USBUSB communication port
RS232 InSerial communication port, RS232 electrical level,connect to PC RS232 port,for PC software control
RS232 OutRS 232 cascading output port, RS232 electrical leve,several processors can be controlled by single PC
VDWAL A6000 rear panel

User basic operation instruction

After processor boot up, VDWALL A6000 will automatically detect the quantity and configuration information of input and output card. Processor LCD display interface varies from different customized boards assembled. The following is standard display interface of full configuration (4 input boards, 2 output boards) .

The top 4 rows show input signal source, for instance, In-B is CVBS2, PIP input signal is SDI2;

The fifth row “Multi Win: Win1->Win2->Win3->Win4” shows the overlay order from top to bottom;

The sixth row shows signal source of each window;

The seventh and eighth rows show multi win mode and switching effect;

The 9 row shows output card display mode User can operate input and output card in operation state:

Input card operation includes input signal selection and PIP operation;

Output card operation includes output card selection, output port selection, display mode selection, mode duplication and brightness adjustment;

Multi-win operation includes overlay order operation and mode duplication;